Logitech Pebble M350 Driver. Logitech Pebble M350 Mause series, Full Feature Software and Driver Downloads for Microsoft Windows and Macintosh Operating Systems.
Logitech Pebble M350 Driver Downloads
Available Drivers for Microsoft Windows Operating Systems
Released: 2020-03-04
Driver File name: Options_8.10.154
Version: 8.10.154
Windows 10 (32-bit,64-bit)
Windows 8 (32-bit,64-bit)
Windows 7 (32-bit,64-bit)
- DOWNLOAD (195.32MB)
Available Drivers for Macintosh Operating Systems
Released: 2020-10-28
Driver File name: Options_8.34.91
Version: 8.34.91
Mac OS 10.15, Mac OS 10.14, Mac OS 10.13
- DOWNLOAD (122.32MB)
Description:
Logitech Options software lets you customize your device’s settings as follows:
Change function key shortcuts
Customize mouse buttons
Adjust point and scroll behaviour
Enable and disable touchpad gestures
Get on-screen notifications when your device’s battery runs low or when you press a lock key.
Detailed Setup of Logitech Pebble M350 Mause
Make sure you turn on the mouse. If the LED under the mouse blinks rapidly, the device is turned on. Long press if the LED light is not flashing rapidly. Plug the receiver into a USB port on your computer.
Connecting directly with Bluetooth: Complete the pairing by opening the Bluetooth settings on your computer.
For windows 7
Open the Control Panel.
Choose Hardware and Sound.
Choose Devices and Printers.
Choose Bluetooth Devices.
Click on Add device.
In the list of Bluetooth devices, select the Logitech device you want to connect to and click Next.
Follow the instructions on the screen to finish pairing.
For windows 8
Go to Applications and find and select Control Panel.
Choose Devices and Printers.
Click on Add device.
In the list of Bluetooth devices, select the Logitech device you want to connect to and select Next.
Follow the instructions on the screen to finish pairing.
For windows 10
Select the Windows icon and then Settings.
Select Devices and then Bluetooth in the left pane.
In the list of Bluetooth devices, select the Logitech device you want to connect to and select Pair.
Follow the instructions on the screen to finish pairing.
For Mac OS X
Open System Preferences and click Bluetooth.
Select the Logitech device you want to connect to from the Devices list and click Pair.
Follow the instructions on the screen to finish pairing.
Once paired, the LED light on your Logitech device stops flashing and remains steady for 5 seconds. The light then turns off to save energy.
Note: This Driver is only downloaded for Logitech Pebble M350.
Logitech Pebble M350 Printer Driver Software Setup ( Install, Uninstall, Wireless Setup )
How to Setup or Install the Logitech Pebble M350 Printer Driver:
- After the download is complete, click Open Folder, then click the downloaded file.
- You can accept the default area to save files. Click Next, and then wait while the installer pulls the data to get ready for the installment on your computer or laptop.
- NOTE: When the download is complete, locate the folder where you saved the document driver file and then double-click it.
- When the Install Wizard starts, follow the instructions on the screen to set up the software.
- When finished restart your computer system or laptop computer.
- Then do an inspection check as well as check reviews.
How to uninstall Logitech Pebble M350 Printer Driver:
- Open the Start Menu.
- Click Control Panel.
- In the Control Panel menu, select Uninstall a Program.
- When the Uninstall Program menu is opened, accept that the printer driver that you want to uninstall.
- After the uninstall process is complete, do not forget to restart your computer, so the computer works normally again.
How to Setup Logitech Pebble M350 Printer Wireless Connection
Preparing Logitech Pebble M350 Printer Driver to Install
- Make sure your printer is plugged in and turned on. If your printer requires an Ethernet connection to access the Internet, you must also use an Ethernet cable to connect the printer to your router.
- Check to see if your printer has installation software. If your printer comes with a CD, chances are you have to insert the CD into your computer and let the installation program run before you can set up the printer.
- Connect your printer to the Internet. This usually consists of using the printer’s LCD panel to select a wireless network and enter a password.
- Make sure your computer is on the same network as your printer. For your wireless printer to receive commands from your computer, both your computer and your printer must be connected to the same Wi-Fi network.
Installing Logitech Pebble M350 on Windows
- Open Start, Click the Windows logo in the lower left corner of the screen.
- Open Settings, Click Settings settings on the lower left side of the window.
- Click Devices, You will find it at the top of the Settings window.
- Click Printer & scanner. This tab is on the left side of the window.
- Click + Add printer or scanner. It’s at the top of the page. Doing so will open a pop-up window, If you see the printer name (e.g., “HP Printer [model number]”) in the “Printers & scanners” section, your printer is connected.
- Click the name of your printer. It must be in the pop-up window. Doing so will ask your computer to connect to the printer. After the connection process is complete, you will be able to use the printer from your computer.
- If Windows cannot find the printer, continue to the next step.
- Try installing the printer with a USB cable. If you don’t see your printer in the Add window, you might be able to install the printer by connecting it to your computer with a cable: Plug your printer into your computer with a USB-to-USB cable, Wait until the installation window appears, Follow the instructions on the screen.
InstallingLogitech Pebble M350 on Mac Os
- Open the Apple Menu, Click the Apple logo in the upper left corner of the screen. A drop-down menu will appear.
- Click System Preferences There is at the top of the drop-down menu.
- Click Printer & Scanner. This printer-shaped icon is in the System Preferences window.
- Click +. This is near the bottom left corner of the window. Do so asks for a pop-up window.
- Click the name of your printer. This should appear in the drop-down menu. Doing so will ask the printer to start setting up; When finished, you will see the name of the printer in the panel on the left side of the window, indicating that the printer has successfully connected to your Mac.
- Try installing the printer with a USB cable. If your Mac can’t find your printer, you might be able to install the printer directly using a USB cable: Update your Mac, Install the printer on your computer with a USB-to-USB-C cable, Wait until the settings window appears, Follow the instructions on the screen.
